Skip to main content

Structural monitoring

Skanska measures water levels in tanks and garages with CHESTER

Skanska wanted to know the water levels in the garages and rainwater tanks of its new developments, where there is no mains power and no internet. CHESTER, our IoT device, measures them with an ultrasonic sensor on batteries and reports them to the building managers.

CHESTER and an ultrasonic level sensor on a bracket over a concrete tank shaft, seen from above
CHESTER and the ultrasonic sensor on a bracket over a tank shaft.

10 m

the longest distance the ultrasonic sensor measures

1 year+

on batteries, the minimum Skanska asked for

IP67

protection of the outdoor sensor against water

The situation

Skanska is a construction and development group in the Czech Republic, Slovakia, Poland, Hungary and Romania, part of the Skanska group based in Sweden.

For its new developments, Skanska wanted to pilot remote measurement of water levels in garages and in tanks that collect rainwater. These places usually have neither mains power nor an internet connection. The device had to measure the level, send it to the internet, run on batteries for at least a year and keep building managers up to date.

What we delivered

We built it on CHESTER, our outdoor IoT device, with a CHESTER-X0B extension module and a robust L-MaxSonar-WRL ultrasonic sensor. The sensor measures from very short distances up to 10 m and is rated IP67 against water. CHESTER also measures air temperature and humidity.

The data travels over Vodafone’s NB-IoT network. We show it in Grafana and, above all, pass it into Sharry, the system Skanska uses for its buildings.

Alerts for building managers

Skanska now has battery-powered remote measurement of water levels. Building and unit managers see the data in Sharry, where it can trigger the next step, for example an alert when the water in a tank rises too high.

Open CHESTER with its board and battery and an ultrasonic sensor clamped to a pipe bracket above a grey floor
An open CHESTER and the ultrasonic sensor on their bracket.

Your use case may already run on our devices

We designed them, so we adapt them to your sensors, enclosure, firmware or brand.

We reply within one business day.

We use your details to answer your inquiry. More in our Privacy policy.