Grain bin monitoring
See inside every grain bin from wherever you are
Grain stays in steel bins for months after the harvest, and heat can build up deep inside, where nobody sees it until the grain spoils. Our device reads temperature cables hanging through each bin and reports from the bin roof, with no power line.
How it works
From the grain to your app
Temperature cables
Up to 150 sensors through the grain
HARDWARIO
CHESTER
Our IoT device, here solar powered
HARDWARIO Cloud
Keeps the readings, passes them on
Your app
Shows each bin, can run aeration
Ready to order
Device, firmware and cloud
-
Device
CHESTER on a carrier board, in an enclosure made for the bin roof.
- Solar powered
- LTE-M
-
Firmware
The Clime catalog application reads 1-Wire probes, adapted to your cables.
- Up to 150 sensors
-
Data
HARDWARIO Cloud keeps every reading and passes it on to your app.
- Webhooks
- REST API
Reference
GrainLink runs its grain monitoring on our units
We developed the GrainLink unit on CHESTER, with a carrier board, firmware and enclosure for the bin roof, and tested it in the climatic chamber of our workshop in Liberec. Eight months passed from the first contact to a validated solution; in 2026 GrainLink ordered the next generation.
1 000+
GrainLink systems delivered in Canada and the USA
Adapted for you
We designed it, so we can change it
The GrainLink unit is our design, adapted. Tell us your cables, your bins and your brand, and we adapt it for you.
- Carrier board
- Firmware
- Enclosure
- Solar power
- Aeration control
Need a grain monitor of your own design? HARDWARIO Engineering develops it to your specification.
Plan your bins with us
Tell us how many bins you monitor and what your customers need to see, and we will plan the units with you.
- Or write to ask@hardwario.com
- Or call directly: +420 775 159 734