Skip to main content

Technical rooms

E.ON monitors its cable cabinets with a sensor we adapted for it

Damp and heat corrode cable cabinets and crack their fuses. To learn which cabinet supplier copes best, E.ON asked us for a battery-powered sensor, and we adapted CHESTER into one that reports the climate inside every day over NB-IoT.

An open cable cabinet with red knife-fuse holders and a grey box labelled E.ON on its side wall
Inside a cable cabinet: the knife fuses that damp and heat can crack.

40

pilot units, developed and made within two months of the order

3+ years

on batteries, without touching the contents of the cabinet

−30 to +70 °C

the rated range of each unit, field-proven down to −40 °C

The situation

Damp and heat get into cable cabinets. In the wrong climate, parts corrode, knife fuses crack and maintenance costs rise sharply. To learn whose cabinets resist the climate best, E.ON decided to monitor temperature and humidity inside individual cabinets online, with a report from each cabinet every day for later analysis.

E.ON also wanted to try NB-IoT, the narrowband network Vodafone had begun to offer: data only, based on LTE, with very good coverage even underground and designed for devices like these. The sensor had to use it, run on batteries for several years, install simply and need little maintenance.

What we delivered

We built the sensor on CHESTER, our outdoor IoT device. It is rated from −30 to +70 °C, has proved itself in the field down to −40 °C and draws so little power that it runs on batteries for 3+ years. A GNSS module records where each sensor is, and a Bluetooth chip lets a technician configure it at close range. E.ON got Grafana dashboards for the data and a phone app for firmware updates and device management.

We developed and made the 40 pilot units within two months of the order. E.ON’s technicians installed them in cable cabinets across the Czech Republic themselves, and the sensors leave the contents of the cabinet untouched.

Suppliers it can rely on

E.ON now sees the condition of its cable cabinets online and knows which suppliers it can rely on. It was also among the first companies in the Czech Republic to use NB-IoT, which proved very reliable.

“We approached HARDWARIO with the goal of testing the NB-IoT network. In a short time we designed a solution for monitoring climatic conditions in cable cabinets, and within two months we had our own device in hand. We look forward to further joint projects,” says Dominik Harman, Project Manager at E.ON.

Your use case may already run on our devices

We designed them, so we adapt them to your sensors, enclosure, firmware or brand.

We reply within one business day.

We use your details to answer your inquiry. More in our Privacy policy.